Product Center

For information only. Please contact us separately for purchasing enquiries. Product information statement

GB/T269-202314 approved public products · 14 on this page

Clear filters

ImageCatalog no.Product / main valueBrandPackUnitMethodsActions

spatula · —

Origin Standard (Shanghai) Co., Ltd.适宜的耐腐蚀方头硬刀片（如宽度32 mm，长度不小于150 mm）；对于1/2和1/4比例锥体试验，刮刀宽度宜为13 minstrumentGB/T 269-2023、GB/T 392-1977、GB/T 512-1965、NBSH-T-0414-2023

DetailsInquiry

Penetrometer · —

Origin Standard (Shanghai) Co., Ltd.能测定锥体刺入试样深度，以0.1 mm为单位；释放锥体时应在无明显摩擦情况下至少能下落62 mm；配备水平调节螺丝和水平instrumentGB/T 269-2023、SH/T 0452-1992

DetailsInquiry

1/2 scale grease worker · —

Origin Standard (Shanghai) Co., Ltd.符合图7尺寸，不锈钢制成，容积为50 mL；工作速度应达到60次/min±10次/min，工作行程最短为35 mminstrumentGB/T 269-2023

DetailsInquiry

1/2 scale cone and cone rod · —

Origin Standard (Shanghai) Co., Ltd.锥体用钢、不锈钢或黄铜制，带洛氏硬度C为45～50的淬火钢尖；锥杆可用不锈钢制成；锥体和锥杆总质量应为37.50 g±0instrumentGB/T 269-2023

DetailsInquiry

1/4 scale grease worker · —

Origin Standard (Shanghai) Co., Ltd.不锈钢制成，符合图8尺寸；工作速度应达到60次/min±10次/min，工作行程最短为14 mm；工作器脂杯内部尺寸为φinstrumentGB/T 269-2023

DetailsInquiry

1/4 scale cone and cone rod · —

Origin Standard (Shanghai) Co., Ltd.锥体用塑料或其他低密度材料制成，带洛氏硬度C为45～50的淬火钢尖；锥杆可用镁合金制成；锥体和锥杆总质量应为9.380instrumentGB/T 269-2023

DetailsInquiry

optional cone · —

Origin Standard (Shanghai) Co., Ltd.图3；锥体总质量应为102.50 g±0.05 g，可移动的组件总质量应为47.50 g±0.05 ginstrumentGB/T 269-2023

DetailsInquiry

full-scale grease worker · —

Origin Standard (Shanghai) Co., Ltd.符合图6尺寸；工作速度应达到60次/min±10次/min，工作行程最小距离为63 mm；带一支在25 °C校正过的合适instrumentGB/T 269-2023

DetailsInquiry

full-scale cone · —

Origin Standard (Shanghai) Co., Ltd.由镁或其他适宜材料制造的圆锥体和可拆卸淬火钢尖组成；锥体总质量应为102.50 g±0.05 g，锥杆质量应为47.50instrumentGB/T 269-2023

DetailsInquiry

grease cutter · —

Origin Standard (Shanghai) Co., Ltd.具有牢固安装的带斜刀的锋利刀片，刀片应平直锋利；打磨两面至1.2 mm厚，并打磨下边缘；支撑木桌应垂直于刀片instrumentGB/T 269-2023

DetailsInquiry

overflow ring · —

Origin Standard (Shanghai) Co., Ltd.边高为13 mm；可选instrumentGB/T 269-2023

DetailsInquiry

air bath or constant-temperature laboratory · —

Origin Standard (Shanghai) Co., Ltd.能够维持在25.0 °C±0.5 °C，并能容纳装配好的润滑脂工作器；水浴应备有防止试样表面与水接触的设施，并带有盖子使instrumentGB/T 269-2023

DetailsInquiry

lint-free cloth or paper · —

Origin Standard (Shanghai) Co., Ltd.pieceGB/T 269-2023

DetailsInquiry

petroleum jelly sample container · —

Origin Standard (Shanghai) Co., Ltd.直径100 mm±5 mm，深度65 mm或大于65 mm的平底圆筒形容器，用厚度至少为1.6 mm的金属制造，可提供合pieceGB/T 269-2023

DetailsInquiry

Some product information is being supplemented. Please contact customer service for complete technical documentation.