Test method library
Currently available: 653 published method pages. Review the edition and source limitations on each page.
GB/T
GB/T (200)
- GB/T 11079-2015 White oil carbonizable substances test method | Standard Test Method
- GB/T 11081-2005 Determination of Ultraviolet Absorbance of White Oil | Standard Test Method
- GB/T 11128-1989 Determination of Glow Value of Jet Fuel | Standard Test Method
- GB/T 11129-1989 Determination of Water Separation Index of Jet Fuels | Standard Test Method
- GB/T 11130-1989 Kerosene Burning Quality Determination Method | Standard Test Method
- GB/T 11132-2022 Determination of hydrocarbons in liquid petroleum products - Fluorescent indicator adsorption method | Standard Test Method
- GB/T 11133-2015 Determination of Water Content in Petroleum Products, Lubricating Oils and Additives - Karl Fischer Coulometric Titration Method | Standard Test Method
- GB/T 11134-2025 Determination of Kauri-Butanol Value of Hydrocarbon Solvents | Standard Test Method
- GB/T 11135-2013 Determination of bromine value of petroleum fractions and industrial aliphatic olefins — Potentiometric titration method | Standard Test Method
- GB/T 11136-2025 Determination of bromine index of petroleum hydrocarbons — Electrometric titration method | Standard Test Method
- GB/T 11137-1989 Determination of kinematic viscosity of dark petroleum products (reverse-flow method) and calculation of dynamic viscosity | Standard Test Method
- GB/T 11138-1994 Copper Strip Corrosion Test Method for Industrial Aromatic Hydrocarbons | Standard Test Method
- GB/T 11139-1989 Calculation method for cetane index of distillate fuels | Standard Test Method
- GB/T 11140-2008 Determination of sulfur content in petroleum products—Wavelength dispersive X-ray fluorescence spectrometry | Standard Test Method
- GB/T 11142-2025 Determination of gassing tendency of insulating oils under electric field and ionization | Standard Test Method
- GB/T 11143-2025 Test method for rust-preventing characteristics of inhibited mineral oil in the presence of water | Standard Test Method
- GB/T 11144-2007 Standard test method for measurement of extreme-pressure properties of lubricating fluids — Timken method | Standard Test Method
- GB/T 11145-2014 Determination of low-temperature viscosity of lubricants — Brookfield viscometer method | Standard Test Method
- GB/T 11146-2009 Determination of water content in crude petroleum—Karl Fischer coulometric titration method | Standard Test Method
- GB/T 11147-2025 Method for sampling asphalt | Standard Test Method
- GB/T 12575-1990 Determination of vanadium content in liquid fuel oils (flameless atomic absorption spectrometric method) | Standard Test Method
- GB/T 12576-1997 Calculation of vapor pressure, relative density, and octane number of liquefied petroleum gas | Standard Test Method
- GB/T 12577-1990 Determination of Flocculation Point of Refrigeration Oils | Standard Test Method
- GB/T 12578-1990 Determination of lubricating oil flowability (U-shaped tube method) | Standard Test Method
- GB/T 12579-1990 Determination of foaming characteristics of lubricating oils | Standard Test Method
- GB/T 12579-2002 Determination of Foaming Characteristics of Lubricating Oils | Standard Test Method
- GB/T 12581-2006 Determination of oxidation characteristics of inhibited mineral oils | Standard Test Method
- GB/T 12582-1990 Determination of electrical conductivity of liquid hydrocarbons (precision electrometer method) | Standard Test Method
- GB/T 12583-1998 Determination of extreme pressure properties of lubricants — Four-ball method | Standard Test Method
- GB/T 12709-1991 Determination of Ageing Characteristics of Lubricating Oils (Conradson Carbon Residue Method) | Standard Test Method
- GB/T 13236-2011 Petroleum and liquid petroleum products — Manual tank level measurement equipment | Standard Test Method
- GB/T 13287-1991 Liquefied petroleum gas volatility determination method | Standard Test Method
- GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Pycnometer method | Standard Test Method
- GB/T 13377-2010 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods | Standard Test Method
- GB/T 13894-2023 Petroleum and liquid petroleum products — Liquid level measurement — Manual method | Standard Test Method
- GB/T 15181-1994 Volumetric calibration method for spherical metal tanks (circumferential tape method) | Standard Test Method
- GB/T 17039-1997 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications | Standard Test Method
- GB/T 17040-2008 Petroleum and petroleum products — Determination of sulfur content — Energy-dispersive X-ray fluorescence spectrometry | Standard Test Method
- GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products — Energy-dispersive X-ray fluorescence spectrometry | Standard Test Method
- GB/T 17144-1997 Determination of Carbon Residue of Petroleum Products (Micro Method) | Standard Test Method
- GB/T 17144-2021 Petroleum products — Determination of carbon residue — Micro method | Standard Test Method
- GB/T 17280-1998 Standard test method for distillation of crude petroleum | Standard Test Method
- GB/T 17474-1998 Determination of benzene in hydrocarbon solvents (gas chromatography) | Standard Test Method
- GB/T 17475-1998 Standard test method for distillation of heavy hydrocarbon mixtures (vacuum still distillation) | Standard Test Method
- GB/T 17475-2020 Distillation test for heavy hydrocarbon mixtures—Vacuum kettle distillation method | Standard Test Method
- GB/T 17476-1998 Standard test method for determination of additive elements, wear metals and contaminants in used lubricating oils and of certain elements in base oils (inductively coupled plasma atomic emission spectrometry) | Standard Test Method
- GB/T 17476-2023 Standard test method for determination of additive elements, wear metals, and contaminants in used lubricating oils and certain elements in base oils (inductively coupled plasma atomic emission spectrometry) | Standard Test Method
- GB/T 17605-1998 Petroleum and liquid petroleum products — Calibration of horizontal cylindrical metal tanks — Manual method | Standard Test Method
- GB/T 17623-2017 Determination of the contents of dissolved gas components in insulating oil by gas chromatography | Standard Test Method
- GB/T 17623-2026 Gas chromatographic determination of dissolved gas component content in insulating oil | Standard Test Method
- GB/T 1792-2015 Determination of mercaptan sulphur in gasoline, kerosene, jet fuel and distillate fuels — Potentiometric titration method | Standard Test Method
- GB/T 1793-2008 Aviation Fuel Water Reaction Test Method | Standard Test Method
- GB/T 1794-1979 Determination of anti-icing additive content in jet fuel | Standard Test Method
- GB/T 1816-2019 Neutrality test for benzene-type products | Standard Test Method
- GB/T 18273-2000 Petroleum and liquid petroleum products — Direct static measurement of oil quantity in vertical tanks (HTG mass measurement method) | Standard Test Method
- GB/T 18609-2011 Determination of acid number of crude oil — Potentiometric titration method | Standard Test Method
- GB/T 1884-2000 Standard Test Method for Density of Crude Petroleum and Liquid Petroleum Products by Laboratory Determination (Hydrometer Method) | Standard Test Method
- GB/T 1885-1998 Petroleum measurement tables | Standard Test Method
- GB/T 19779-2005 Petroleum and liquid petroleum products — Calculation of oil quantities — Static measurement | Standard Test Method
- GB/T 19780-2005 Volume calibration of spherical metal tanks — External measurement method with total station | Standard Test Method
- GB/T 1995-1998 Petroleum products — Calculation of viscosity index | Standard Test Method
- GB/T 2012-1989 Aromatic hydrocarbon acid wash test method | Standard Test Method
- GB/T 2013-2010 Determination of density of liquid petrochemical products | Standard Test Method
- GB/T 21450-2008 Crude petroleum and petroleum products — Compressibility factors for hydrocarbons in the range of density 638kg/m³~1074kg/m³ | Standard Test Method
- GB/T 21452-2008 Determination of particulate matter content in middle distillate fuels — Laboratory filtration method | Standard Test Method
- GB/T 21789-2008 Petroleum products and other liquids — Determination of flash point — Abel closed-cup method | Standard Test Method
- GB/T 21789-2025 Determination of flash point — Abel closed-cup method | Standard Test Method
- GB/T 23800-2009 Determination of thermal stability of organic heat transfer fluids | Standard Test Method
- GB/T 23801-2021 Determination of fatty acid methyl ester content in middle distillates — Infrared spectroscopy method | Standard Test Method
- GB/T 2429-1988 Calculation method for net heat of combustion of aviation fuels | Standard Test Method
- GB/T 2430-2008 Freezing point of aviation fuels | Standard Test Method
- GB/T 2432-1981 Determination of tetraethyl lead content in gasoline (complexometric titration) | Standard Test Method
- GB/T 2433-2001 Determination of sulfate ash in additives and additive-containing lubricating oils | Standard Test Method
- GB/T 2539-2023 Determination of melting point of petroleum wax — Cooling curve method | Standard Test Method
- GB/T 255-1977 Determination of distillation range of petroleum products | Standard Test Method
- GB/T 258-2016 Light petroleum products — Determination of acidity | Standard Test Method
- GB/T 258-2025 Determination of acidity of light petroleum products | Standard Test Method
- GB/T 259-1988 Determination of water-soluble acids and alkalis in petroleum products | Standard Test Method
- GB/T 25961-2010 Test method for corrosive sulfur in electrical insulating oils | Standard Test Method
- GB/T 25962-2010 Test method for leakage of automotive wheel bearing grease under high-speed conditions | Standard Test Method
- GB/T 25963-2022 Determination of aromatic hydrocarbon content in middle distillates containing fatty acid methyl esters — High performance liquid chromatography with differential refractive index detector | Standard Test Method
- GB/T 25964-2010 Petroleum and liquid petroleum products — Method for measuring the volume, density and mass of oil in vertical cylindrical tanks using a hybrid tank measurement system | Standard Test Method
- GB/T 260-2016 Determination of water content in petroleum products — Distillation method | Standard Test Method
- GB/T 261-2008 Determination of flash point — Pensky-Martens closed cup method | Standard Test Method
- GB/T 262-2010 Standard Test Method for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents | Standard Test Method
- GB/T 264-1983 Determination of Acid Number of Petroleum Products | Standard Test Method
- GB/T 265-1988 Kinematic viscosity of petroleum products and calculation of dynamic viscosity | Standard Test Method
- GB/T 266-1988 Determination of Engler viscosity of petroleum products | Standard Test Method
- GB/T 267-1988 Determination of Flash Point and Fire Point of Petroleum Products (Open Cup Method) | Standard Test Method
- GB/T 268-1987 Petroleum products — Determination of carbon residue — Conradson method | Standard Test Method
- GB/T 269-2023 Determination of Cone Penetration of Lubricating Greases and Petrolatum | Standard Test Method
- GB/T 28768-2012 Determination of hydrocarbon types and oxygenates in motor gasoline—Multidimensional gas chromatography | Standard Test Method
- GB/T 28769-2012 Determination of free glycerol content in fatty acid methyl esters — Gas chromatography | Standard Test Method
- GB/T 30514-2014 Glass capillary kinematic viscometers — Specifications and operating instructions | Standard Test Method
- GB/T 30515-2014 Determination of kinematic viscosity of transparent and opaque liquid petroleum products and calculation of dynamic viscosity | Standard Test Method
- GB/T 30517-2014 Test for free water in liquefied petroleum gas Visual method | Standard Test Method
- GB/T 30518-2014 Determination of soluble residues in liquefied petroleum gas — High-temperature gas chromatography | Standard Test Method
- GB/T 30519-2024 Determination of hydrocarbon group composition and benzene content in light petroleum distillates and products—Multidimensional gas chromatography | Standard Test Method
- GB/T 3142-2019 Determination of load-carrying capacity of lubricants — Four-ball method | Standard Test Method
- GB/T 3143-1982 Color determination method for liquid chemical products (Hazen unit—platinum-cobalt color number) | Standard Test Method
- GB/T 3144-1982 Determination of hydrocarbon impurities in toluene by gas chromatography | Standard Test Method
- GB/T 3145-2023 Determination of Crystallizing Point of Benzene | Standard Test Method
- GB/T 3146.1-2010 Aromatic hydrocarbons for industrial use and related materials — Determination of distillation range — Part 1: Distillation method | Standard Test Method
- GB/T 31776-2015 Test method for the determination of methanol content in methanol gasoline for motor vehicles | Standard Test Method
- GB/T 3209-2009 Determination method for evaporation residue of benzene products | Standard Test Method
- GB/T 32384-2015 Separation and determination of aromatic hydrocarbon components in middle distillates — Solid phase extraction-gas chromatography | Standard Test Method
- GB/T 32693-2016 Determination of aniline compounds in gasoline by gas chromatography-mass spectrometry | Standard Test Method
- GB/T 33298-2016 Determination of cetane number of diesel fuels — Air flow adjustment method | Standard Test Method
- GB/T 33400-2016 Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters | Standard Test Method
- GB/T 33646-2017 Determination of ester compounds in motor gasoline by gas chromatography | Standard Test Method
- GB/T 33647-2017 Determination of silicon content in motor gasoline — Inductively coupled plasma optical emission spectrometry | Standard Test Method
- GB/T 33648-2017 Identification and determination of typical unconventional additives in motor gasoline — Infrared spectrometry | Standard Test Method
- GB/T 33649-2017 Determination of oxygenates and aniline compounds in motor gasoline by gas chromatography | Standard Test Method
- GB/T 34097-2017 Determination of light stability of petroleum products | Standard Test Method
- GB/T 34099-2017 Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc, and phosphorus content in residual fuel oils — Inductively coupled plasma emission spectrometric method | Standard Test Method
- GB/T 34100-2017 Determination of total sulfur in light hydrocarbons, engine fuels and other oils by ultraviolet fluorescence method | Standard Test Method
- GB/T 34101-2017 Determination of hydrogen sulfide content in fuel oils — Rapid liquid-phase extraction method | Standard Test Method
- GB/T 34102-2017 Determination of 2,6- di-tert-butyl-p-cresol content in jet fuel — Differential pulse voltammetry | Standard Test Method
- GB/T 3498-2008 Determination of dropping point of lubricating grease over a wide temperature range | Standard Test Method
- GB/T 3535-2006 Determination of pour point of petroleum products | Standard Test Method
- GB/T 3535-2025 Determination of Pour Point of Petroleum Products | Standard Test Method
- GB/T 3536-2008 Petroleum products — Determination of flash point and fire point — Cleveland open cup method | Standard Test Method
- GB/T 3555-1992 Determination of Saybolt Color of Petroleum Products (Saybolt Chromometer Method) | Standard Test Method
- GB/T 37160-2019 Determination of trace metal elements in heavy distillate oils, residual oils and crude oils — Inductively coupled plasma atomic emission spectrometry | Standard Test Method
- GB/T 37222-2018 Determination of spray combustion persistence of fire-resistant hydraulic fluids — Open-cone jet nozzle test method | Standard Test Method
- GB/T 37322-2026 Gasoline Detergency Evaluation—Simulated Test Method for Intake Valve Deposits of Gasoline Engines | Standard Test Method
- GB/T 380-1977 Determination of sulfur content in petroleum products (Lamp combustion method) | Standard Test Method
- GB/T 38050-2019 Determination of Permeability of Emulsified Asphalt | Standard Test Method
- GB/T 38074-2019 Determination of friction and wear performance of manual transmission lubricants SRV test machine method | Standard Test Method
- GB/T 382-2017 Standard test method for smoke point of kerosene and aviation turbine fuel | Standard Test Method
- GB/T 382-2025 Kerosene and Jet Fuel Smoke Point Determination Method | Standard Test Method
- GB/T 38203-2019 Determination of fatty acid methyl ester content in aviation turbine fuel by high performance liquid chromatography with evaporative light scattering detector | Standard Test Method
- GB/T 38234-2019 Determination of fatty acid methyl esters in aviation turbine fuel by gas chromatography-mass spectrometry | Standard Test Method
- GB/T 384-1981 Determination of Calorific Value of Petroleum Products | Standard Test Method
- GB/T 386-2010 Determination of cetane number of diesel fuel | Standard Test Method
- GB/T 386-2021 Determination of cetane number of diesel fuels | Standard Test Method
- GB/T 387-1990 Determination of sulfur content in dark petroleum products (Tube furnace method) | Standard Test Method
- GB/T 388-1964 Determination of sulfur content in petroleum products (oxygen bomb method) | Standard Test Method
- GB/T 391-1977 Determination of corrosiveness of engine lubricating oils | Standard Test Method
- GB/T 392-1977 Determination of oil separation from lubricating grease under pressure | Standard Test Method
- GB/T 4016-2019 Petroleum product terminology | Standard Test Method
- GB/T 4507-2014 Standard Test Method for Softening Point of Bitumen Ring-and-Ball Apparatus | Standard Test Method
- GB/T 4508-2025 Standard Test Method for Ductility of Asphalt | Standard Test Method
- GB/T 4509-2010 Determination of Penetration of Bitumen | Standard Test Method
- GB/T 4510-2017 Petroleum asphalt brittleness point determination method — Fraass method | Standard Test Method
- GB/T 4756-2015 Manual sampling of petroleum liquids | Standard Test Method
- GB/T 4929-1985 Determination of Dropping Point of Lubricating Grease | Standard Test Method
- GB/T 4945-2002 Petroleum products and lubricants — Determination of acid number and base number — Color indicator method | Standard Test Method
- GB/T 4985-2021 Determination of Needle Penetration of Petroleum Waxes | Standard Test Method
- GB/T 5018-2008 Test method for corrosion preventive properties of lubricating greases | Standard Test Method
- GB/T 503-1995 Determination of octane number of gasoline (Motor method) | Standard Test Method
- GB/T 503-2016 Motor octane number of gasoline | Standard Test Method
- GB/T 505-1965 Determination of mercaptan sulfur in engine fuels (ammonia-copper sulfate method) | Standard Test Method
- GB/T 507-2002 Insulating oil breakdown voltage determination method | Standard Test Method
- GB/T 508-1985 Determination of Ash in Petroleum Products | Standard Test Method
- GB/T 509-1988 Determination of Existent Gum in Engine Fuels | Standard Test Method
- GB/T 5096-2017 Copper strip corrosion test for petroleum products | Standard Test Method
- GB/T 510-2018 Determination of Freezing Point of Petroleum Products | Standard Test Method
- GB/T 511-2010 Determination of mechanical impurities in petroleum and petroleum products and additives | Standard Test Method
- GB/T 512-1965 Determination of Water in Lubricating Grease | Standard Test Method
- GB/T 513-1977 Determination of mechanical impurities in lubricating grease (acid decomposition method) | Standard Test Method
- GB/T 514-2005 Technical conditions for glass liquid thermometers for petroleum product testing | Standard Test Method
- GB/T 5304-2001 Standard Test Method for Thin-Film Oven Test of Petroleum Asphalt | Standard Test Method
- GB/T 5487-2015 Research octane number of gasoline | Standard Test Method
- GB/T 6531-1986 Determination of sediment in crude petroleum and fuel oils (extraction method) | Standard Test Method
- GB/T 6532-2012 Determination of salt content in crude oil - Potentiometric titration method | Standard Test Method
- GB/T 6533-2012 Determination of water and sediment in crude oil by the centrifuge method | Standard Test Method
- GB/T 6536-2010 Standard test method for distillation characteristics of petroleum products at atmospheric pressure | Standard Test Method
- GB/T 6538-2010 Determination of apparent viscosity of engine oils — Cold cranking simulator method (historical study) | Standard Test Method
- GB/T 6538-2022 Determination of apparent viscosity of engine oils by cold cranking simulator method | Standard Test Method
- GB/T 6539-1997 Determination of Electrical Conductivity of Aviation and Distillate Fuels | Standard Test Method
- GB/T 6540-1986 Petroleum products — Determination of colour | Standard Test Method
- GB/T 6540-2025 Determination of color of petroleum products | Standard Test Method
- GB/T 6986-2014 Determination of Cloud Point of Petroleum Products | Standard Test Method
- GB/T 7304-2014 Acid number of petroleum products by potentiometric titration | Standard Test Method
- GB/T 7305-2003 Determination of water separation characteristics of petroleum and synthetic fluids | Standard Test Method
- GB/T 7325-1987 Determination of Evaporation Loss of Lubricating Greases and Lubricating Oils | Standard Test Method
- GB/T 7326-1987 Standard Test Method for Copper Strip Corrosion by Lubricating Greases | Standard Test Method
- GB/T 7363-2021 Test method for polynuclear aromatic hydrocarbons in petroleum wax | Standard Test Method
- GB/T 7364-2025 Test method for carbonizable substances in paraffin wax | Standard Test Method
- GB/T 8017-2012 Determination of vapor pressure of petroleum products Reid method | Standard Test Method
- GB/T 8018-2015 Determination of oxidation stability of gasoline Induction period method | Standard Test Method
- GB/T 8019-2025 Determination of gum content in fuels — Jet evaporation method | Standard Test Method
- GB/T 8020-2015 Determination of lead content in gasoline by atomic absorption spectrometry | Standard Test Method
- GB/T 8021-2003 Determination of saponification value of petroleum products | Standard Test Method
- GB/T 8022-2019 Determination of Demulsibility Characteristics of Lubricating Oils | Standard Test Method
- GB/T 8023-1987 Viscosity-temperature calculation chart for liquid petroleum products | Standard Test Method
- GB/T 8025-1987 Determination of trace sulfur in petroleum waxes and petroleum fats (Microcoulometric method) | Standard Test Method
- GB/T 8026-2023 Determination of drop melting point of petroleum waxes and petrolatums | Standard Test Method
- GB/T 8120-1987 Determination of Purity of High-Purity n-Heptane and Isooctane (Capillary Chromatography) | Standard Test Method
- GB/T 8926-2012 Determination of Insolubles in Used Lubricating Oils | Standard Test Method
- GB/T 8927-2008 Petroleum and liquid petroleum products — Temperature measurement — Manual method | Standard Test Method
- GB/T 8928-2008 Standard Test Method for Density of Solid and Semi-Solid Petroleum Asphalt | Standard Test Method
- GB/T 9168-2025 Determination of distillation range of petroleum products Vacuum distillation method | Standard Test Method
- GB/T 9169-2010 Determination of thermal oxidation stability of jet fuel — JFTOT method | Standard Test Method
- GB/T 9169-2023 Determination of thermal oxidation stability of jet fuels — JFTOT method | Standard Test Method
- GB/T 9170-1988 Determination of total nitrogen content in lubricating oils and fuel oils (improved Kjeldahl method) | Standard Test Method
- GB/T 9171-1988 Determination of Borderline Pumping Temperature of Engine Oils | Standard Test Method
- GB/T 9932-1988 Performance Evaluation Method for Internal Combustion Engine Oils (Caterpillar 1H2 Method) | Standard Test Method
- GB/T 9933-1988 Performance evaluation of internal combustion engine oils (Caterpillar 1G2 method) | Standard Test Method
NB/SH/T
NB/SH/T (115)
- NB/SH/T 0880-2014 Determination of calcium, chlorine, copper, magnesium, phosphorus, sulfur and zinc in lubricating oils and additives — Wavelength dispersive X-ray fluorescence spectrometry | Standard Test Method
- NB/SH/T 0917-2015 Determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gas — Ultraviolet fluorescence method | Standard Test Method
- NB/SH/T 0031-2013 Diesel engine piston cleanliness rating method | Standard Test Method
- NB/SH/T 0059-2010 Determination of evaporation loss of lubricating oils — Noack method | Standard Test Method
- NB/SH/T 0162-2021 Determination of basic nitrogen content in petroleum distillates — Color indicator method | Standard Test Method
- NB/SH/T 0174-2015 Detection of mercaptans and other sulfur compounds in petroleum products and hydrocarbon solvents — Doctor test method | Standard Test Method
- NB/SH/T 0189-2017 Determination of anti-wear properties of lubricating oils — Four-ball method | Standard Test Method
- NB/SH/T 0207-2010 Determination of water content in insulating liquids by Karl Fischer coulometric titration | Standard Test Method
- NB/SH/T 0230-2019 Determination of liquefied petroleum gas composition by gas chromatography | Standard Test Method
- NB/SH/T 0233-2024 Liquefied petroleum gas sampling method | Standard Test Method
- NB/SH/T 0248-2019 Determination of cold filter plugging point of diesel and domestic heating oils | Standard Test Method
- NB/SH/T 0253-2021 Determination of total sulfur content in light petroleum products - Electrometric method | Standard Test Method
- NB/SH/T 0306-2013 Determination of load-carrying capacity of lubricating oils FZG Visual method | Standard Test Method
- NB/SH/T 0399-2013 Determination of Peroxide Value of Petroleum Waxes | Standard Test Method
- NB/SH/T 0408-2013 Determination of surface wax on waxed paper or paperboard | Standard Test Method
- NB/SH/T 0414-2023 Standard Test Method for Odor of Petroleum Wax | Standard Test Method
- NB/SH/T 0415-2013 Determination of ultraviolet absorbance and absorptivity of petroleum products | Standard Test Method
- NB/SH/T 0425-2023 Determination of wax content in petroleum asphalt | Standard Test Method
- NB/SH/T 0430-2019 Determination of equilibrium reflux boiling point of brake fluid | Standard Test Method
- NB/SH/T 0450-2019 Determination of Oxidation Corrosion of Synthetic Oil | Standard Test Method
- NB/SH/T 0474-2010 Determination of Diluted Gasoline Content in In-Service Gasoline Engine Oils Gas Chromatography | Standard Test Method
- NB/SH/T 0505-2017 Determination of shear stability of polymer-containing oils — Ultrasonic shear method | Standard Test Method
- NB/SH/T 0517-2014 Evaluation of rust-preventive characteristics of automotive gear lubricants — L-33-1 method | Standard Test Method
- NB/SH/T 0518-2016 Evaluation of load-carrying capacity of vehicle gear oils L-37 method | Standard Test Method
- NB/SH/T 0558-2016 Determination of boiling range distribution of petroleum fractions by gas chromatography | Standard Test Method
- NB/SH/T 0570-2017 Determination of platinum content in reforming catalysts - Spectrophotometric method | Standard Test Method
- NB/SH/T 0606-2019 Determination of hydrocarbon types in middle distillates — Mass spectrometry | Standard Test Method
- NB/SH/T 0632-2014 Determination of specific heat capacity — Differential scanning calorimetry (DSC) | Standard Test Method
- NB/SH/T 0639-2024 Determination of Thermal Stability of Petroleum Wax | Standard Test Method
- NB/SH/T 0652-2023 Professional Terminology for Petroleum Asphalt | Standard Test Method
- NB/SH/T 0656-2017 Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants — Elemental Analyzer Method | Standard Test Method
- NB/SH/T 0663-2014 Determination of alcohols and ethers in gasoline by gas chromatography | Standard Test Method
- NB/SH/T 0699-2023 Test method for compatibility between refrigeration oils and refrigerants | Standard Test Method
- NB/SH/T 0711-2019 Determination of manganese content in gasoline by atomic absorption spectrometry | Standard Test Method
- NB/SH/T 0713-2023 Determination of benzene and toluene content in gasoline by gas chromatography | Standard Test Method
- NB/SH/T 0721-2016 Determination of friction and wear properties of lubricating greases — High-frequency linear vibration test machine (SRV) method | Standard Test Method
- NB/SH/T 0723-2014 Corrosiveness evaluation method for diesel engine oils under 121℃ | Standard Test Method
- NB/SH/T 0737-2025 Test method for elastic recovery of asphalt: Ductilometer method | Standard Test Method
- NB/SH/T 0740-2025 Polymer Modified Asphalt Separation Test Method | Standard Test Method
- NB/SH/T 0741-2010 Determination of hydrocarbon group composition in gasoline Multidimensional gas chromatography | Standard Test Method
- NB/SH/T 0764-2023 Diesel engine nozzle coking test method XUD-9 method | Standard Test Method
- NB/SH/T 0811-2010 Determination of oxidation stability of unused hydrocarbon insulating oils | Standard Test Method
- NB/SH/T 0811-2023 Determination of oxidation stability of insulating oils | Standard Test Method
- NB/SH/T 0815-2010 Determination of burning behaviour of asphalt — Oxygen index method | Standard Test Method
- NB/SH/T 0823-2010 Test method for corrosion preventive properties of lubricating greases in diluted synthetic seawater | Standard Test Method
- NB/SH/T 0824-2010 Determination of additive element content in lubricating oils — Inductively coupled plasma atomic emission spectrometry | Standard Test Method
- NB/SH/T 0826-2010 Determination of Volatility of Engine Oils by Capillary Gas Chromatography | Standard Test Method
- NB/SH/T 0827-2010 Determination of sulfur-containing compounds in light petroleum distillates by gas chromatography and sulfur selective detection | Standard Test Method
- NB/SH/T 0829-2010 Boiling range distribution of petroleum fractions within the boiling range 174℃~700℃ Determination by gas chromatography | Standard Test Method
- NB/SH/T 0830-2010 Determination of wear characteristics of non-petroleum-based and petroleum-based hydraulic fluids by vane pump method | Standard Test Method
- NB/SH/T 0831-2010 Determination of fatty acid methyl esters and linolenic acid methyl ester content in biodiesel — Gas chromatography | Standard Test Method
- NB/SH/T 0833-2010 , HFAE, HFAS and HFC types of fire-resistant hydraulic fluids | Standard Test Method
- NB/SH/T 0836-2010 Determination of acidity value of insulating oil Automatic potentiometric titration method | Standard Test Method
- NB/SH/T 0838-2010 Determination of polycyclic aromatic (PCA) content in unused lubricating base oils and asphaltene-free petroleum distillates — Dimethyl sulfoxide extraction refractive index method | Standard Test Method
- NB/SH/T 0839-2010 Test method for low-temperature torque of automotive wheel bearing greases | Standard Test Method
- NB/SH/T 0842-2017 Determination of sulfur content in light liquid fuels by monochromatic wavelength dispersive X-ray fluorescence spectrometry | Standard Test Method
- NB/SH/T 0843-2023 Evaluation of petrochemical industry testing systems - Statistical techniques | Standard Test Method
- NB/SH/T 0844-2010 Determination of corrosion and oxidation stability of turbine oils | Standard Test Method
- NB/SH/T 0845-2010 Viscosity Shear Stability of Transmission Lubricants — Tapered Roller Bearing Rig | Standard Test Method
- NB/SH/T 0846-2010 Anti-wear hydraulic oil high-pressure plunger pump test method | Standard Test Method
- NB/SH/T 0847-2010 Determination of friction and wear properties of extreme pressure lubricating oils SRV testing machine method | Standard Test Method
- NB/SH/T 0848-2010 Determination of Apparent Viscosity of Polyethylene Wax | Standard Test Method
- NB/SH/T 0850-2010 Determination of flow spread of lubricating greases for precision machinery and optical instruments | Standard Test Method
- NB/SH/T 0852-2010 Determination of the viscosity-temperature relationship of in-service oils and soot-containing engine oils at low temperatures | Standard Test Method
- NB/SH/T 0853-2010 In-service lubricant condition monitoring method Fourier transform infrared (FT-IR) spectroscopy trend analysis method | Standard Test Method
- NB/SH/T 0856-2013 High-temperature detergency evaluation method for agricultural diesel engine oils | Standard Test Method
- NB/SH/T 0857-2013 Light-duty direct injection diesel engine oil ring sticking and piston cleanliness evaluation method | Standard Test Method
- NB/SH/T 0859-2013 Determination of thermal stability of chemical substances by thermal analysis | Standard Test Method
- NB/SH/T 0860-2013 Standard test method for viable bacteria and fungi counts in liquid fuels — Filtration and culture procedures | Standard Test Method
- NB/SH/T 0861-2013 Determination of pentane insolubles Membrane filtration method | Standard Test Method
- NB/SH/T 0863-2013 Guide for determination of chemical elements in fluid catalytic cracking catalysts by X-ray fluorescence spectrometry | Standard Test Method
- NB/SH/T 0864-2023 Determination of elements in grease by inductively coupled plasma optical emission spectrometry | Standard Test Method
- NB/SH/T 0865-2013 Determination of Wear Metals and Contaminant Elements in In-Service Lubricating Oils by Rotating Disc Electrode Atomic Emission Spectrometry | Standard Test Method
- NB/SH/T 0867-2013 Determination of soot content in diesel engine oils — Thermogravimetric analysis method | Standard Test Method
- NB/SH/T 0868-2013 Determination of cleanliness of jet fuel — Portable automatic particle counter method | Standard Test Method
- NB/SH/T 0870-2013 Determination of dynamic viscosity and density of petroleum products and calculation of kinematic viscosity — Stabinger viscometer method | Standard Test Method
- NB/SH/T 0872-2013 Determination of shear stability of lubricating grease in the presence of water Water stability test | Standard Test Method
- NB/SH/T 0874-2013 Crude petroleum and liquid petroleum products — Laboratory determination of density — Weighing digital liquid density meter method | Standard Test Method
- NB/SH/T 0877-2014 Determination of rubber compatibility of lubricating oils | Standard Test Method
- NB/SH/T 0879-2014 Determination of boiling range distribution of residual-containing oil samples — High-temperature gas chromatography | Standard Test Method
- NB/SH/T 0882-2014 Determination of extreme pressure properties of lubricating oils SRV testing machine method | Standard Test Method
- NB/SH/T 0883-2014 Determination of diesel fuel ignition delay and derived cetane number — Constant volume combustion chamber method | Standard Test Method
- NB/SH/T 0885-2014 Determination of total aromatics and total saturates in lubricant base oils by high performance liquid chromatography with refractive index detector | Standard Test Method
- NB/SH/T 0886-2014 Determination of pour point of petroleum products — Automatic tilt method | Standard Test Method
- NB/SH/T 0889-2014 Determination of normal paraffin content and carbon number distribution in liquid paraffin products and raw materials — Gas chromatography | Standard Test Method
- NB/SH/T 0890-2014 Test method for recovery of emulsified asphalt residue by low-temperature evaporation | Standard Test Method
- NB/SH/T 0891-2014 Determination of soot content in used engine oils — Spectrophotometric method | Standard Test Method
- NB/SH/T 0892-2015 Determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry | Standard Test Method
- NB/SH/T 0901-2015 Determination of glass transition temperature of mineral oils — Differential scanning calorimetry | Standard Test Method
- NB/SH/T 0905-2024 Determination of color of petroleum products — Automatic tristimulus method | Standard Test Method
- NB/SH/T 0912-2015 Engine bench test oil 100℃ kinematic viscosity determination method | Standard Test Method
- NB/SH/T 0915-2015 Determination of total active sulfur value in light petroleum distillates — Potentiometric titration method | Standard Test Method
- NB/SH/T 0916-2015 Determination of biodiesel (fatty acid methyl esters) content in diesel fuel — Infrared spectroscopy method | Standard Test Method
- NB/SH/T 0920-2016 Determination of the anti-fretting wear ability of lubricating grease under high Hertzian contact pressure High-frequency linear vibration testing machine method | Standard Test Method
- NB/SH/T 0940-2016 Standard test method for analysis of in-service lubricants using a specific four-in-one tester (atomic emission spectrometry, infrared spectrometry, viscosity and laser particle counter) | Standard Test Method
- NB/SH/T 0324-2010 Determination of oil separation from lubricating grease — Cone mesh method | Standard Test Method
- NB/SH/T 0407-2013 Test method for water-soluble acids or bases in petroleum waxes | Standard Test Method
- NB/SH/T 0509-2010 Test method for separation of asphalt into four fractions | Standard Test Method
- NB/SH/T 0562-2013 Standard Test Method for Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature | Standard Test Method
- NB/SH/T 0655-2015 Test method for polycyclic aromatic hydrocarbons in petrolatum | Standard Test Method
- NB/SH/T 0812-2010 Determination of 2- furfural and related components in mineral insulating oil | Standard Test Method
- NB/SH/T 0834-2010 Determination of moderate high-temperature piston deposits of engine oils — Thermal oxidation simulation test method (TEOST MHT) | Standard Test Method
- NB/SH/T 0893-2015 Evaluation method for medium-temperature dispersancy of passenger car direct injection diesel engine oils | Standard Test Method
- NB/SH/T 0894-2015 Determination of shear stability of polymer-containing oils by ultrasonic method | Standard Test Method
- NB/SH/T 0895-2015 Determination of filter blocking tendency of middle distillate fuels and liquid fuels | Standard Test Method
- NB/SH/T 0896-2015 Evaluation of automotive engine oil performance—Procedure ⅢG method | Standard Test Method
- NB/SH/T 0898-2015 Evaluation of low-temperature oil sludge performance of automotive engine oils Procedure VG method | Standard Test Method
- NB/SH/T 0899-2015 Evaluation of Fuel Economy Performance of Automotive Engine Oils Procedure VIB Method | Standard Test Method
- NB/SH/T 0902-2015 Determination of the separability value of asphaltene-containing heavy fuel oils induced by n-heptane phase separation — Optical scanning method | Standard Test Method
- NB/SH/T 0903-2015 Determination of methanol content in fatty acid methyl esters — Gas chromatography | Standard Test Method
- NB/SH/T 0904-2015 Determination of Oxidation Stability of Automatic Transmission Fluids | Standard Test Method
- NB/SH/T 0906-2015 Determination of thermal stability of engine oils — Heat tube test method | Standard Test Method
- NB/SH/T 0908-2015 Determination of Stability and Compatibility of Heavy Fuel Oils and Crude Oils Optical Detection Method | Standard Test Method
- NB/SH/T 0909-2015 Test method for peel strength of special wax for poultry dehairing | Standard Test Method
- NB/SH/T 0918-2015 Determination of acidity of solid catalysts — Ammonia chemisorption method | Standard Test Method
SH/T
SH/T (338)
- SH/T 0018-2007 Standard Test Method for Apparent Viscosity of Petroleum Waxes Containing Additives (Hot Melt Adhesives) | Standard Test Method
- SH/T 0028-1990 Determination of Turbidity of Lubricating Oil Detergents | Standard Test Method
- SH/T 0029-1990 Determination of Ash in Petroleum Coke | Standard Test Method
- SH/T 0037-1990 Determination of Storage Dissolution Characteristics of Gear Oils | Standard Test Method
- SH/T 0064-1991 Test method for free water and particulate contaminants in distillate fuels | Standard Test Method
- SH/T 0065-1991 Sampling of engine coolant or rust inhibitor test samples and preparation of their aqueous solutions | Standard Test Method
- SH/T 0066-2002 Engine coolant foam tendency determination method (glassware method) | Standard Test Method
- SH/T 0079-1991 Preparation methods of reagent solutions for petroleum product testing | Standard Test Method
- SH/T 0093-1991 Determination of solid particulate contaminants in jet fuels | Standard Test Method
- SH/T 0103-2007 Determination of shear stability of polymer-containing oils — Diesel injector nozzle method | Standard Test Method
- SH/T 0123-1993 Determination of oxidation characteristics of extreme-pressure lubricating oils | Standard Test Method
- SH/T 0125-1992 Liquefied petroleum gas hydrogen sulfide test method (lead acetate method) | Standard Test Method
- SH/T 0135-1992 Determination of Peroxide Value of Liquid Paraffin | Standard Test Method
- SH/T 0136-1992 Test method for sulfides in petroleum wax | Standard Test Method
- SH/T 0163-1992 Determination of Total Acid Number of Petroleum Products (Semimicro Color Indicator Method) | Standard Test Method
- SH/T 0168-1992 Determination of colour of petroleum products | Standard Test Method
- SH/T 0172-2001 Determination of sulfur content in petroleum products (high-temperature method) | Standard Test Method
- SH/T 0173-1992 Technical specifications for glass capillary viscometers | Standard Test Method
- SH/T 0175-2004 Oxidation Stability of Distillate Fuel Oil (Accelerated Method) | Standard Test Method
- SH/T 0176-1992 Determination of Peroxide Value of Jet Fuels | Standard Test Method
- SH/T 0181-2005 Determination of Naphthalene Hydrocarbons in Jet Fuel (Ultraviolet Spectrophotometric Method) | Standard Test Method
- SH/T 0182-1992 Determination of copper content in light petroleum products (spectrophotometric method) | Standard Test Method
- SH/T 0183-1992 Determination of explosibility of hydrocarbon fuels | Standard Test Method
- SH/T 0184-1992 Determination of storage stability of diesel fuel (glacial acetic acid-formaldehyde method) | Standard Test Method
- SH/T 0185-1992 Determination of Oxidation Stability of Straight-run Lubricating Oils | Standard Test Method
- SH/T 0191-1992 Determination of Demulsibility of Lubricating Oils | Standard Test Method
- SH/T 0193-1992 Determination of oxidation stability of lubricating oils — Rotating oxygen bomb method | Standard Test Method
- SH/T 0193-2008 Determination of oxidation stability of lubricating oils — Rotating oxygen bomb method | Standard Test Method
- SH/T 0194-1992 Determination of active sulfur in additives and additive-containing oils | Standard Test Method
- SH/T 0195-1992 Lubricating oil corrosion test method | Standard Test Method
- SH/T 0202-1992 Extreme-Pressure Properties of Lubricating Greases (Four-Ball Method) | Standard Test Method
- SH/T 0205-1992 Determination of refractive index and specific dispersion of electrical insulating liquids | Standard Test Method
- SH/T 0206-1992 Determination of oxidation stability of transformer oil | Standard Test Method
- SH/T 0208-1992 Determination of thermal oxidation stability and corrosion of aviation hydraulic oils | Standard Test Method
- SH/T 0209-1992 Determination of Thermal Stability of Hydraulic Oil | Standard Test Method
- SH/T 0222-1992 Determination of total sulfur content in liquefied petroleum gas (coulometric method) | Standard Test Method
- SH/T 0228-1992 Determination of barium, calcium, and zinc content in lubricating oils (atomic absorption spectrometry) | Standard Test Method
- SH/T 0231-1992 Determination of hydrogen sulfide content in liquefied petroleum gas (chromatographic method) | Standard Test Method
- SH/T 0232-1992 Liquefied petroleum gas copper strip corrosion test method | Standard Test Method
- SH/T 0234-1992 Determination of Iodine Value and Unsaturated Hydrocarbon Content of Light Petroleum Products (Iodine-Ethanol Method) | Standard Test Method
- SH/T 0236-1992 Determination of Bromine Value of Petroleum Products | Standard Test Method
- SH/T 0237-1992 Determination of Storage Stability of Gasoline | Standard Test Method
- SH/T 0238-1992 Determination of Storage Stability of Diesel Fuels | Standard Test Method
- SH/T 0239-1992 Determination of C₆~C₉ alkanes, cycloalkanes and aromatics in reformer feedstocks and reformates (porous-layer packed-column chromatography) | Standard Test Method
- SH/T 0241-1992 Determination of static thermal stability of jet fuels | Standard Test Method
- SH/T 0242-1992 Determination of lead content in light petroleum products (atomic absorption spectrometry) | Standard Test Method
- SH/T 0243-1992 Determination of Iodine Value of Solvent Gasoline | Standard Test Method
- SH/T 0245-1992 Determination of aromatic hydrocarbon content in solvent naphtha (chromatographic method) | Standard Test Method
- SH/T 0246-1992 Determination of Water Content in Light Petroleum Products (Coulometric Method) | Standard Test Method
- SH/T 0248-2006 Determination of cold filter plugging point of diesel and domestic heating oils | Standard Test Method
- SH/T 0249-1992 Determination of Pumpability of Special Fuel Oils | Standard Test Method
- SH/T 0250-1992 Determination of Thermal Stability of Special Fuel Oil | Standard Test Method
- SH/T 0251-1993 Determination of base number of petroleum products (perchloric acid potentiometric titration method) | Standard Test Method
- SH/T 0253-1992 Determination of total sulfur content in light petroleum products — Coulometric method | Standard Test Method
- SH/T 0255-1992 Determination of water in additives and additive-containing lubricating oils (coulometric method) | Standard Test Method
- SH/T 0256-1992 Determination of Demulsification Time of Lubricating Oils | Standard Test Method
- SH/T 0257-1992 Qualitative Test Method for Water in Lubricating Oils | Standard Test Method
- SH/T 0258-1992 Determination of Color of Lubricating Oils | Standard Test Method
- SH/T 0259-1992 Determination of thermal oxidation stability of lubricating oils | Standard Test Method
- SH/T 0264-1992 Evaluation method for high-temperature oxidation and bearing corrosion of internal combustion engine oils (Peter W-1 method) | Standard Test Method
- SH/T 0265-1992 Evaluation method for high-temperature oxidation and bearing corrosion of internal combustion engine oils (L-38 method) | Standard Test Method
- SH/T 0267-1992 Test method for acidification of sodium hydroxide extract from lubricating oil | Standard Test Method
- SH/T 0270-1992 Determination of calcium content in additives and additive-containing lubricating oils | Standard Test Method
- SH/T 0293-1992 Determination of Saturated Vapor Pressure of Vacuum Greases | Standard Test Method
- SH/T 0296-1992 Determination of phosphorus content in additives and additive-containing lubricating oils (colorimetric method) | Standard Test Method
- SH/T 0297-1992 Determination of calcium content in additives | Standard Test Method
- SH/T 0299-1992 Determination of Oxidation Stability of Internal Combustion Engine Oils | Standard Test Method
- SH/T 0300-1992 Crankshaft Box Simulation Test Method (QZX method) | Standard Test Method
- SH/T 0302-1992 Test method for ammonia resistance of ammonia-resistant turbine oils | Standard Test Method
- SH/T 0303-1992 Determination of sulfur content in additives (coulometric method) | Standard Test Method
- SH/T 0304-1999 Test method for corrosive sulfur in electrical insulating oil | Standard Test Method
- SH/T 0307-1992 Determination of Wear Characteristics of Petroleum-Based Hydraulic Oils (Vane Pump Method) | Standard Test Method
- SH/T 0308-1992 (2004) Determination of air release value of lubricating oils | Standard Test Method
- SH/T 0309-1992 Determination of calcium, barium and zinc in additive-containing lubricating oils (complexometric titration method) | Standard Test Method
- SH/T 0318-1992 Technical specifications for open-cup flash point testers | Standard Test Method
- SH/T 0319-1992 Determination of Soap Content in Lubricating Grease | Standard Test Method
- SH/T 0322-1992 Determination of harmful particles in lubricating grease | Standard Test Method
- SH/T 0323-1992 (2004) Determination of the ultimate strength of lubricating grease | Standard Test Method
- SH/T 0325-1992 Determination of Oxidation Stability of Lubricating Grease | Standard Test Method
- SH/T 0326-1992 Determination of leakage of lubricating grease for automotive wheel bearings | Standard Test Method
- SH/T 0327-1992 (2004) Determination of Ash in Lubricating Grease | Standard Test Method
- SH/T 0329-1992 Determination of free alkali and free organic acid in lubricating grease | Standard Test Method
- SH/T 0330-1992 Determination of mechanical impurities in lubricating grease (extraction method) | Standard Test Method
- SH/T 0331-1992 Lubricating grease corrosion test method | Standard Test Method
- SH/T 0335-1992 Determination of Chemical Stability of Lubricating Grease | Standard Test Method
- SH/T 0336-1994 Determination of Foreign Matter Content in Lubricating Grease (Microscopic Method) | Standard Test Method
- SH/T 0337-1992 Determination of Evaporation Loss of Lubricating Greases | Standard Test Method
- SH/T 0338-1992 Determination of Low-Temperature Torque of Ball Bearing Greases | Standard Test Method
- SH/T 0339-1992 NaY Method for determination of molecular sieve unit cell parameters | Standard Test Method
- SH/T 0340-1992 NaY Molecular sieve crystallinity determination method | Standard Test Method
- SH/T 0341-1992 Determination of alumina content in catalyst carriers | Standard Test Method
- SH/T 0342-1992 Method for determination of iron content in reforming catalysts | Standard Test Method
- SH/T 0343-1992 Determination of chlorine content in catalysts (ion-selective electrode method) | Standard Test Method
- SH/T 0344-1992 Determination of molybdenum trioxide content in hydrorefining catalysts | Standard Test Method
- SH/T 0345-1992 Determination of cobalt content in hydrorefining catalysts | Standard Test Method
- SH/T 0346-1992 Determination of nickel content in hydrorefining catalysts | Standard Test Method
- SH/T 0402-1992 Determination of Tensile Strength of Paraffin Wax | Standard Test Method
- SH/T 0403-1992 Determination of color of paraffin wax | Standard Test Method
- SH/T 0405-1992 Petroleum jelly heavy metal limit test method | Standard Test Method
- SH/T 0406-1992 Determination of ultraviolet absorbance of petrolatum | Standard Test Method
- SH/T 0409-1992 Determination of aromatic hydrocarbon content in liquid paraffin (ultraviolet spectrophotometry) | Standard Test Method
- SH/T 0410-1992 Determination of normal paraffin content and carbon number distribution in liquid paraffin and raw materials (gas chromatography) | Standard Test Method
- SH/T 0411-1992 Determination of aromatic hydrocarbon content in liquid paraffin (colorimetric method) | Standard Test Method
- SH/T 0412-1992 Determination of normal paraffin content in liquid paraffin and its feedstock oil (chromatographic method) | Standard Test Method
- SH/T 0413-1992 Determination of trace basic nitrogen content in liquid paraffin | Standard Test Method
- SH/T 0422-2000 Determination of Ash in Asphalt | Standard Test Method
- SH/T 0424-1992 Determination of sag of petroleum asphalt | Standard Test Method
- SH/T 0427-1992 Determination of gear wear for lubricating grease | Standard Test Method
- SH/T 0428-2008 Standard test method for life of lubricating greases in ball bearings at elevated temperatures | Standard Test Method
- SH/T 0436-1992 Determination of compatibility between synthetic lubricating oils for aviation and rubber | Standard Test Method
- SH/T 0451-1992 Test method for storage stability of liquid lubricants | Standard Test Method
- SH/T 0452-1992 Lubricating grease storage stability test method | Standard Test Method
- SH/T 0453-1992 Test method for water resistance and water-ethanol (1:1) solution) performance of lubricating grease | Standard Test Method
- SH/T 0472-1992 Determination of Trace Metal Content in Synthetic Aviation Lubricating Oils (Atomic Absorption Method) | Standard Test Method
- SH/T 0508-1992 Determination of Oil Content in Oil Shale (Low-Temperature Retorting Method) | Standard Test Method
- SH/T 0520-1992 Evaluation Method for Thermal Oxidation Stability of Vehicle Gear Oils (L-60 Method) | Standard Test Method
- SH/T 0532-1992 Determination of anti-scuffing ability of lubricating oils (Timken method) | Standard Test Method
- SH/T 0533-1993 Rust corrosion evaluation method for rust-preventive oil and grease test specimens after rust-prevention testing | Standard Test Method
- SH/T 0557-1993 Standard Test Method for Viscosity of Petroleum Asphalt (Vacuum Capillary Method) | Standard Test Method
- SH/T 0559-1993 Determination of alkyl nitrate content in diesel fuel (spectrophotometric method) | Standard Test Method
- SH/T 0560-1993 Test method for thermal stability of lubricating oils | Standard Test Method
- SH/T 0561-1993 Determination of thermal decomposition temperature of antioxidant and anti-corrosion additives (capillary method) | Standard Test Method
- SH/T 0565-2008 Determination of sludge and corrosion tendency of inhibited mineral oils | Standard Test Method
- SH/T 0566-1993 Determination of Thickening Ability of Lubricant Viscosity Index Improvers | Standard Test Method
- SH/T 0568-1993 Determination of Storage Stability of Water-in-Oil Emulsions (Oven Method) | Standard Test Method
- SH/T 0569-1993 Determination of stability of water-in-oil emulsions (low temperature to room temperature cycling method) | Standard Test Method
- SH/T 0571-1993 Determination of Zeolite Surface Area in Catalysts | Standard Test Method
- SH/T 0572-1993 Calculation method for catalyst pore size distribution (calculation method from nitrogen desorption isotherm) | Standard Test Method
- SH/T 0573-1993 Test method for wear particles in in-service lubricating oils (analytical ferrography) | Standard Test Method
- SH/T 0575-1993 L-ERB Two-Stroke Gasoline Engine Oil Evaluation Method | Standard Test Method
- SH/T 0576-1993 L-ERC Two-Stroke Gasoline Engine Oil Evaluation Method | Standard Test Method
- SH/T 0577-1993 Determination of high-temperature friction and wear performance of railway diesel engine oils (bronze-steel method) | Standard Test Method
- SH/T 0579-1994 Emulsion stability determination method | Standard Test Method
- SH/T 0580-1994 Determination of oil content in emulsified liquid | Standard Test Method
- SH/T 0581-1994 Rolling fluid rust performance test method | Standard Test Method
- SH/T 0582-1994 Determination of sodium content in lubricating oils and additives (atomic absorption spectrometry) | Standard Test Method
- SH/T 0583-1994 Determination of Relative Molecular Mass of Hydrocarbons (Thermoelectric Measurement of Vapor Pressure Method) | Standard Test Method
- SH/T 0584-1994 Rust-preventive oil and grease packaging storage test method (louvered box method) | Standard Test Method
- SH/T 0585-1994 Determination of oxidation stability of aviation fuels (potential residue method) | Standard Test Method
- SH/T 0589-1994 Determination of Transition Temperature of Petroleum Waxes (Differential Scanning Calorimetry) | Standard Test Method
- SH/T 0596-1994 Determination of contact resistance of lubricating grease | Standard Test Method
- SH/T 0604-2000 Determination of density of crude petroleum and petroleum products (U-shaped oscillating tube method) | Standard Test Method
- SH/T 0605-2008 Determination of molybdenum content in lubricating oils and additives — Atomic absorption spectrometry | Standard Test Method
- SH/T 0607-1994 Determination of group composition of rubber filling oils, process oils and petroleum-derived oils (clay-silica gel adsorption chromatography) | Standard Test Method
- SH/T 0614-1995 Determination of composition of industrial propane and butane (gas chromatography) | Standard Test Method
- SH/T 0615-1995 Determination of C₂~C₅ hydrocarbons in gasoline (gas chromatography) | Standard Test Method
- SH/T 0617-1995 Determination of Lead Content in Lubricating Oils (Atomic Absorption Spectrometry) | Standard Test Method
- SH/T 0618-1995 Determination of dynamic viscosity of lubricating oils under high shear conditions (Ravenfield method) | Standard Test Method
- SH/T 0619-1995 Determination of Water Separability of Marine Oils | Standard Test Method
- SH/T 0620-1995 Determination of corrosion of cast aluminium alloys by engine coolants under heat-transfer conditions | Standard Test Method
- SH/T 0621-1995 Determination of chloride content in engine coolants | Standard Test Method
- SH/T 0625-1995 Determination of γ-Al₂O₃ Content in Silica-Alumina Catalysts (X-ray Diffraction Method) | Standard Test Method
- SH/T 0629-1996 Determination of arsenic content in naphtha (potassium borohydride-silver nitrate spectrophotometric method) | Standard Test Method
- SH/T 0630-1996 Petroleum products—Determination of bromine number and bromine index—Electrolytic method | Standard Test Method
- SH/T 0631-1996 Determination of barium, calcium, phosphorus, sulfur and zinc in lubricating oils and additives (X-ray fluorescence spectrometry) | Standard Test Method
- SH/T 0633-1996 Rust corrosion test method for water-cooled two-stroke gasoline engine oils | Standard Test Method
- SH/T 0634-1996 Determination of filter plugging tendency of water-cooled two-stroke gasoline engine oils | Standard Test Method
- SH/T 0635-1996 Sampling method for liquid petroleum products (semi-automatic method) | Standard Test Method
- SH/T 0637-1996 Determination of Adhesion Rate of Petroleum Asphalt | Standard Test Method
- SH/T 0638-1996 Determination of Oil Content in Microcrystalline Wax (Volumetric Method) | Standard Test Method
- SH/T 0642-1997 Determination of Spontaneous Ignition Temperature of Liquid Petroleum and Petrochemical Products | Standard Test Method
- SH/T 0643-1997 Determination of water spray resistance of lubricating grease | Standard Test Method
- SH/T 0644-1997 Low-temperature stability test method for aviation hydraulic oil | Standard Test Method
- SH/T 0645-1997 Determination of detergency of diesel engine oils (heat tube oxidation method) | Standard Test Method
- SH/T 0646-1997 Exhaust smoke evaluation method for air-cooled two-stroke gasoline engine oils | Standard Test Method
- SH/T 0647-1997 Evaluation method for preignition tendency of water-cooled two-stroke gasoline engine oils | Standard Test Method
- SH/T 0648-1997 Water-cooled two-stroke gasoline engine oil detergency and general performance evaluation method | Standard Test Method
- SH/T 0649-1997 Marine lubricating oil corrosion test method | Standard Test Method
- SH/T 0650-1997 Test method for rust-preventing characteristics of metal protectives (humidity cabinet method) | Standard Test Method
- SH/T 0651-1997 Determination of Tin Content in Reforming Catalysts (Atomic Absorption Spectrometry) | Standard Test Method
- SH/T 0653-1998 Determination of Carbon Number Distribution of Normal Paraffins and Non-Normal Paraffins in Petroleum Waxes (Gas Chromatography) | Standard Test Method
- SH/T 0654-1998 Standard Test Method for Kinematic Viscosity of Asphalts | Standard Test Method
- SH/T 0656-1998 Standard test methods for instrumental determination of carbon, hydrogen and nitrogen in petroleum products and lubricants | Standard Test Method
- SH/T 0658-1998 Determination of Hydrogen Content in Jet Fuels (Low-Resolution Nuclear Magnetic Resonance Method) | Standard Test Method
- SH/T 0659-1998 Determination of hydrocarbon types in saturated hydrocarbon fractions of gas oil (mass spectrometry) | Standard Test Method
- SH/T 0660-1998 Test method for vapor phase rust preventive oil | Standard Test Method
- SH/T 0661-1998 Determination of Evaporation Loss of Lubricating Greases over a Wide Temperature Range | Standard Test Method
- SH/T 0662-1998 Determination of ultraviolet absorbance of mineral oils | Standard Test Method
- SH/T 0667-1998 Air-cooled two-stroke gasoline engine oil detergency evaluation method | Standard Test Method
- SH/T 0668-1998 Lubricity Evaluation Method for Air-Cooled Two-Stroke Gasoline Engine Oils | Standard Test Method
- SH/T 0669-1998 Air-cooled two-stroke gasoline engine oil exhaust system blockage evaluation method | Standard Test Method
- SH/T 0670-1998 Evaluation of the lubricity of water-cooled two-stroke gasoline engine oils | Standard Test Method
- SH/T 0678-1999 Determination of dropping point of petrolatum | Standard Test Method
- SH/T 0687-2000 Determination of Lubricity of Aviation Turbine Fuels (Ball Cylinder Lubricity Evaluator Method) | Standard Test Method
- SH/T 0689-2000 Total sulfur in light hydrocarbons, engine fuels and other oils by ultraviolet fluorescence | Standard Test Method
- SH/T 0693-2000 Determination of aromatic hydrocarbons in gasoline (gas chromatography) | Standard Test Method
- SH/T 0694-2000 Calculation of Cetane Index of Middle Distillate Fuels (Four-Variable Equation Method) | Standard Test Method
- SH/T 0698-2000 Test method for chemical stability of refrigeration oils in refrigerant systems (sealed glass tube method) | Standard Test Method
- SH/T 0703-2001 Standard test method for measuring apparent viscosity of lubricating oils at high temperature and high shear rate (multiple capillary viscometer method) | Standard Test Method
- SH/T 0705-2001 Standard test method for determination of vanadium in heavy oils by spectrophotometry | Standard Test Method
- SH/T 0706-2001 Determination of aluminum and silicon content in fuel oil (inductively coupled plasma emission spectrometry and atomic absorption spectrometry) | Standard Test Method
- SH/T 0708-2001 Method for Evaluating the Detergency and General Performance of Water-Cooled Two-Stroke Gasoline Engine Oils (OMC 70HP Method) | Standard Test Method
- SH/T 0709-2001 Water-cooled two-stroke gasoline engine oil detergency and general performance evaluation method (Mercury 15HP method) | Standard Test Method
- SH/T 0710-2001 Air-cooled two-stroke gasoline engine oil detergency evaluation method (EGD method) | Standard Test Method
- SH/T 0712-2002 Determination of iron content in gasoline (atomic absorption spectrometry) | Standard Test Method
- SH/T 0716-2002 Determination of Fretting Wear Resistance of Lubricating Greases | Standard Test Method
- SH/T 0719-2002 Determination of Oxidation Induction Time of Lubricating Oils (Pressure Differential Scanning Calorimetry) | Standard Test Method
- SH/T 0722-2002 Determination of High Temperature Foaming Characteristics of Lubricating Oils | Standard Test Method
- SH/T 0725-2002 Calculation Method for Carbon-Type Composition of Petroleum-Based Insulating Oils | Standard Test Method
- SH/T 0731-2004 Determination of Evaporation Loss of Lubricating Oils (Thermogravimetric Noack Method) | Standard Test Method
- SH/T 0732-2004 Determination of the relationship between viscosity and temperature of lubricating oils at low temperature and low shear rate (temperature scanning method) | Standard Test Method
- SH/T 0733-2004 Determination of flash point (Tag closed cup method) | Standard Test Method
- SH/T 0749-2004 Determination of Additive Elements Content in Lubricating Oils and Additives (Inductively Coupled Plasma Atomic Emission Spectrometry) | Standard Test Method
- SH/T 0750-2005 Determination of high-temperature oxidative deposits in engine oils (thermal oxidation simulation test method) | Standard Test Method
- SH/T 0751-2005 Determination of viscosity at high temperature and high shear rate (tapered plug viscometer method) | Standard Test Method
- SH/T 0753-2005 Determination of Chemical Group Composition of Lubricant Base Oils (Thin-Layer Chromatography) | Standard Test Method
- SH/T 0754-2005 Evaluation method for corrosion performance of diesel engine oils under 135℃ | Standard Test Method
- SH/T 0755-2005 Thermal oxidation stability evaluation method for manual transmission fluids and rear axle oils (L-60-1 method) | Standard Test Method
- SH/T 0756-2005 Thermal stability evaluation method for manual transmission fluids (cyclic durability test method) | Standard Test Method
- SH/T 0757-2005 Evaluation Method for Fuel Economy Performance of Internal Combustion Engine Oils (Procedure VI Method) | Standard Test Method
- SH/T 0758-2005 Evaluation method for high-temperature oxidation and anti-wear performance of internal combustion engine oils (Procedure ⅢE method) | Standard Test Method
- SH/T 0759-2005 Evaluation method for low-temperature sludge and anti-wear performance of internal combustion engine oils (Procedure VE method) | Standard Test Method
- SH/T 0760-2005 Performance evaluation of diesel engine oils (Mack T-8 method) | Standard Test Method
- SH/T 0761-2005 Diesel engine oil performance evaluation method (Mack T-9 method) | Standard Test Method
- SH/T 0762-2005 Determination of Friction Coefficient of Lubricating Oils (Four-Ball Method) | Standard Test Method
- SH/T 0763-2005 Gasoline Engine Oil Rust Prevention Evaluation Method (BRT Method) | Standard Test Method
- SH/T 0765-2005 Diesel fuel lubricity by high-frequency reciprocating rig (HFRR) | Standard Test Method
- SH/T 0768-2005 Flash Point Determination Method (Constant Closed Cup Method) | Standard Test Method
- SH/T 0770-2005 Determination of Freezing Point of Aviation Fuels (Automatic Phase Transition Method) | Standard Test Method
- SH/T 0771-2005 Petroleum products — Determination of pour point (automatic pressure pulse method) | Standard Test Method
- SH/T 0772-2005 Determination of Engine Oil Filtration Performance (After Treatment with Water and Dry Ice and Short-Time Heating) | Standard Test Method
- SH/T 0773-2005 Test method for life characteristics of automotive wheel hub bearing grease | Standard Test Method
- SH/T 0774-2005 Accelerated Aging Test Method for Asphalt (PAV Method) | Standard Test Method
- SH/T 0775-2005 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt (BBR Method) | Standard Test Method
- SH/T 0776-2005 Determination of Fracture Properties of Asphalt (DT Method) | Standard Test Method
- SH/T 0777-2005 Test method for rheological properties of asphalt (DSR method) | Standard Test Method
- SH/T 0778-2005 Determination of wax content in petroleum asphalt (cracking deoiling method) | Standard Test Method
- SH/T 0779-2005 Saybolt viscosity test method for emulsified asphalt | Standard Test Method
- SH/T 0780-2005 Determination of Demulsibility of Emulsified Asphalt | Standard Test Method
- SH/T 0781-2005 Test method for miscibility with water of emulsified asphalt | Standard Test Method
- SH/T 0782-2005 Diesel engine oil performance evaluation method (Caterpillar 1K/1N method) | Standard Test Method
- SH/T 0783-2005 Evaluation method for high-temperature oxidation and anti-wear performance of internal combustion engine oils (CEPT- III method) | Standard Test Method
- SH/T 0784-2006 Standard test method for extreme pressure properties of lubricating greases (high-frequency linear vibration test machine method) | Standard Test Method
- SH/T 0785-2006 Determination of burning persistence of fire-resistant liquid wick-type | Standard Test Method
- SH/T 0786-2006 Diesel engine oil detergency evaluation method (Caterpillar 1M-PC method) | Standard Test Method
- SH/T 0787-2006 Determination of wear characteristics of petroleum-based hydraulic oils by high-pressure vane pump | Standard Test Method
- SH/T 0788-2006 Evaluation method for high-temperature oxidation and bearing corrosion of internal combustion engine oils (Procedure VII method) | Standard Test Method
- SH/T 0790-2007 Determination of Oxidation Induction Time of Lubricating Greases (Pressure Differential Scanning Calorimetry) | Standard Test Method
- SH/T 0791-2007 Determination of engine oil filterability (after water treatment and prolonged heating) | Standard Test Method
- SH/T 0792-2007 Determination of 2,6- di-tert-butyl-p-cresol and 2,6- di-tert-butylphenol content in electrical insulating oil (Infrared absorption spectrometry) | Standard Test Method
- SH/T 0794-2007 Determination of vapor pressure of petroleum products — Micro method | Standard Test Method
- SH/T 0795-2007 Determination of emulsion stability of fire-resistant fluids in category HFAE | Standard Test Method
- SH/T 0797-2007 Determination of benzene content in spark-ignition engine fuels — Mid-infrared spectroscopy | Standard Test Method
- SH/T 0800-2007 Determination of Wax Drop Point | Standard Test Method
- SH/T 0801-2007 Determination of homogeneity and miscibility of engine oils | Standard Test Method
- SH/T 0804-2007 Detection of corrosive sulfur of insulating oils—Silver strip test | Standard Test Method
- SH/T 0805-2008 Determination of filterability of lubricating oils | Standard Test Method
- SH/T 0806-2008 Determination of aromatic hydrocarbon content in middle distillates by high performance liquid chromatography with differential refractive index detector | Standard Test Method
- SH/T 0100-1991 Determination of Solidification Point of Petroleum Wax | Standard Test Method
- SH/T 0101-1991 Determination of Dielectric Strength of Petroleum Waxes and Petrolatums | Standard Test Method
- SH/T 0102-1992 Determination of copper content in lubricating oils and liquid fuels (atomic absorption spectrometry) | Standard Test Method
- SH/T 0104-1992 Stability test method for refrigeration oils under the action of refrigerants (Philipp method) | Standard Test Method
- SH/T 0105-1992 Determination of oil film thickness of solvent-diluted rust-preventive oil | Standard Test Method
- SH/T 0106-1992 Test method for human sweat corrosion resistance of rust preventive oil | Standard Test Method
- SH/T 0107-1992 Test method for human sweat detergency of rust-preventive oil | Standard Test Method
- SH/T 0108-1992 Determination of Average Molecular Weight and Molecular Weight Distribution of Certain Polymeric Additives (Size Exclusion Chromatography) | Standard Test Method
- SH/T 0120-1992 Determination of Phenol Content in Phenol-Refined Lubricating Oils | Standard Test Method
- SH/T 0122-1992 Determination of Roll Stability of Lubricating Grease | Standard Test Method
- SH/T 0124-2000 Determination of oxidation stability of turbine oils containing antioxidants | Standard Test Method
- SH/T 0128-1992 Test method for heavy metals in paraffin wax | Standard Test Method
- SH/T 0129-1992 Test method for ignition residue of petroleum waxes and petroleum greases | Standard Test Method
- SH/T 1550-2012 Determination of purity and impurities of methyl tert-butyl ether (MTBE) for industrial use — Gas chromatography | Standard Test Method
- SH/T 0170-1992 Determination of Carbon Residue of Petroleum Products (Electric Furnace Method) | Standard Test Method
- SH/T 0171-1992 Determination of Nitrogen in Petroleum and Petroleum Products (Thymol Colorimetric Method) | Standard Test Method
- SH/T 0177-1992 Determination of aromatic hydrocarbon content in light petroleum products (gravimetric method) | Standard Test Method
- SH/T 0178-1992 Determination of burning quality of kerosene (lamp method) | Standard Test Method
- SH/T 0187-1992 Determination of extreme pressure properties of lubricating oils (Falex method) | Standard Test Method
- SH/T 0188-1992 Determination of Wear Properties of Lubricating Oils (Falex Pin and V Block Method) | Standard Test Method
- SH/T 0190-1992 Determination of the coefficient of friction of liquid lubricants (MM-200 method) | Standard Test Method
- SH/T 0196-1992 Determination of Oxidation Stability of Lubricating Oils | Standard Test Method
- SH/T 0197-1992 Determination of Iron Content in Lubricating Oils | Standard Test Method
- SH/T 0020-1990 Determination of phosphorus content in gasoline (spectrophotometric method) | Standard Test Method
- SH/T 0201-1992 Determination of friction coefficient of liquid lubricants (Falex pin and V block method) | Standard Test Method
- SH/T 0202-1992 Determination of Extreme Pressure Properties of Lubricating Greases (Four-Ball Machine Method) | Standard Test Method
- SH/T 0204-1992 Determination of anti-wear properties of lubricating grease (four-ball machine method) | Standard Test Method
- SH/T 0021-1990 Determination of naphthenic acid soap content in jet fuel | Standard Test Method
- SH/T 0210-1992 Hydraulic fluid filterability test method | Standard Test Method
- SH/T 0211-1998 Test method for low-temperature adhesion of rust-preventive oils and greases | Standard Test Method
- SH/T 0212-1998 Test method for removability of rust-preventive oil and grease films | Standard Test Method
- SH/T 0214-1998 Test method for separation stability of rust-preventive oils and greases | Standard Test Method
- SH/T 0215-1999 Determination of precipitation value and abrasiveness of rust-preventive oils and greases | Standard Test Method
- SH/T 0216-1999 Sprayability test method for rust preventive oil | Standard Test Method
- SH/T 0217-1998 Method for evaluating the rust grade of test specimens in rust-preventive oil and grease tests | Standard Test Method
- SH/T 0218-1993 Preparation method of test specimens for rust-preventive oils and greases | Standard Test Method
- SH/T 0219-1992 Determination of Thermal Oxidation Stability of Heat Treatment Oils | Standard Test Method
- SH/T 0022-1990 Determination of hydrogen content in petroleum fractions (lamp method) | Standard Test Method
- SH/T 0220-1992 Determination of Cooling Performance of Heat Treatment Oils | Standard Test Method
- SH/T 0221-1992 Determination of density or relative density of liquefied petroleum gas (pressure density meter method) | Standard Test Method
- SH/T 0223-1992 Determination of barium content in additives (complexometric titration) | Standard Test Method
- SH/T 0224-1992 Determination of nitrogen content in petroleum additives (Kjeldahl method) | Standard Test Method
- SH/T 0225-1992 Determination of barium content in additives and additive-containing lubricating oils | Standard Test Method
- SH/T 0226-1992 Determination of zinc content in additives and additive-containing lubricating oils | Standard Test Method
- SH/T 0227-1992 Determination of boron content in additives | Standard Test Method
- SH/T 0229-1992 Sampling method for solid and semi-solid petroleum products | Standard Test Method
- SH/T 0023-1990 Silver Strip Corrosion Test Method for Jet Fuels | Standard Test Method
- SH/T 0024-1990 Determination of Precipitation Value of Lubricating Oils | Standard Test Method
- SH/T 0027-1990 Determination of magnesium content in additives (atomic absorption spectrometry) | Standard Test Method
- SH/T 0030-1990 Determination of Channel Point of Vehicle Gear Oils | Standard Test Method
- SH/T 0313-1992 Petroleum coke test methods | Standard Test Method
- SH/T 0033-1990 Determination of true density of petroleum coke | Standard Test Method
- SH/T 0034-1990 Determination of active components in additives | Standard Test Method
- SH/T 0035-1990 Determination of Evaporation Loss of Rust-Preventive Greases | Standard Test Method
- SH/T 0036-1990 Water displacement test method for rust preventive oil | Standard Test Method
- SH/T 0398-2007 Determination of Molecular Weight of Petroleum Waxes and Petrolatums | Standard Test Method
- SH/T 0429-2007 Determination of compatibility of lubricating greases and liquid lubricants with rubber | Standard Test Method
- SH/T 0048-1991 Determination of Apparent Viscosity of Lubricating Greases | Standard Test Method
- SH/T 0578-1994 Emulsion pH value determination method | Standard Test Method
- SH/T 0058-1991 Determination of silicon, vanadium and iron contents in petroleum coke | Standard Test Method
- SH/T 0060-1991 Determination of oxygen absorption of rust-preventive grease (oxygen bomb method) | Standard Test Method
- SH/T 0061-1991 Determination of magnesium content in lubricating oils (atomic absorption spectrometry) | Standard Test Method
- SH/T 0616-1995 Determination of Water Separation Index of Jet Fuels (Portable Separator Method) | Standard Test Method
- SH/T 0062-1991 Determination of Depentanization of Gasoline and Naphtha | Standard Test Method
- SH/T 0063-1991 Test method for drying property of rust-preventive oil | Standard Test Method
- SH/T 0657-2007 Determination of trace nitrogen in liquid petroleum hydrocarbons — Oxidative combustion and chemiluminescence method | Standard Test Method
- SH/T 0067-1991 Determination of ash content of engine coolants and rust inhibitors | Standard Test Method
- SH/T 0068-2002 Determination of density or relative density of engine coolants and their concentrates (hydrometer method) | Standard Test Method
- SH/T 0069-1991 Determination of pH value of engine antifreeze, rust inhibitor and coolant | Standard Test Method
- SH/T 0072-1991 Determination of Friction Coefficient of Liquid Lubricants (Oscillator Method) | Standard Test Method
- SH/T 0073-1991 Determination of Jet Fuel Anti-Wear Index (Ring-on-Block Method) | Standard Test Method
- SH/T 0074-1991 Determination of thin-layer oxygen absorption oxidation stability of gasoline engine oils | Standard Test Method
- SH/T 0075-1991 CC grade diesel engine oil high-temperature detergency evaluation method (1135C₂ method) | Standard Test Method
- SH/T 0076-1991 Test for furfural in lubricating oils | Standard Test Method
- SH/T 0077-1991 Determination of Iron Content in Lubricating Oils (Atomic Absorption Spectrometry) | Standard Test Method
- SH/T 0078-1991 Determination of Trace Water in Liquefied Petroleum Gas (Electrolytic Method) | Standard Test Method
- SH/T 0793-2007 Determination of aromatic carbon content in hydrocarbon oils (High-resolution nuclear magnetic resonance method) | Standard Test Method
- SH/T 0796-2007 B-100 Determination of free glycerol and total glycerol content in biodiesel fatty acid methyl esters (gas chromatography) | Standard Test Method
- SH/T 0080-1991 Corrosiveness test method for rust-preventive oils and greases | Standard Test Method
- SH/T 0803-2007 Determination of polychlorinated biphenyl contaminants in insulating oil — Capillary gas chromatography | Standard Test Method
- SH/T 0082-1991 Test method for dropping point of rust-preventive oils and greases | Standard Test Method
- SH/T 0083-1991 Weathering test method for rust-preventive oil | Standard Test Method
- SH/T 0085-1991 Engine coolant corrosion determination method (glassware method) | Standard Test Method
- SH/T 0086-1991 Determination of water content in engine coolant concentrate (Karl Fischer method) | Standard Test Method
- SH/T 0087-1991 Test method for cavitation corrosion characteristics of aluminum pumps with engine coolants | Standard Test Method
- SH/T 0088-1991 Engine coolant simulated use corrosion determination method | Standard Test Method
- SH/T 0089-1991 Determination of boiling point of engine coolants | Standard Test Method
- SH/T 0090-1991 Engine coolant freezing point determination method | Standard Test Method
- SH/T 0091-1991 Determination of Reserve Alkalinity of Engine Coolants and Rust Inhibitors | Standard Test Method
- SH/T 0092-1991 Petroleum acid test method | Standard Test Method